Download

Just make sure the Main Fader of your mixer is turned up before entering DAW mode.. Presonus 32 4 2 Digital Mixer Manual For MoreIn this section, you will be creating the assignment for the Main Output of Studio One, and any Cue Mixes you want to create on the StudioLive (this is expressed in the Studio One Integration Manual for more information if you want to do a more advanced setup).

Given the ability for digital patching and for sending audio through multiple sources (including Network sources from our StudioLive Rack mixers and NSB stageboxes), the purpose of this article is to instruct on using USB connection for playback and recording, in a simple way that can get you started.. The input source is USB and the audio recorded that is played back returns to that fader.. Presonus 32 4 2 Digital Mixer Manual For MoreIt is suggested to go through these articles to learn how to route this audio, and the setup expressed will get you prepared to follow the Studio One instructions further.. The Main Output for Studio One should be assigned in the Output tab as depicted to 37 and 38 as this was also the outputs you setup for the general playback in the console by default.. Studio One automatically scans your system for all available drivers and selects a driver.

First, the information listed on these KB articles below are necessary to learn general playback audio from your Mac or PC computer.. An example of where the Digital Return is on UC Surface on a Rackmount mixer is below as well.

The Factory Default sampling rate on a StudioLive Console or Rack is 48 khz Note that AVB routing already has a template you can select in Step 1.

Then press OK and this should take you back to the arrange window When pressing the Tape Input Button on your console, you should now have the ability to select the USB source and control of the Tape Input from this menu.. This will help you to not have to set this back up after doing it once already Press the TAB key to edit the next name on the Left Hand Side.. To make the settings recall every time you open a New Song that is an Empty Song, make sure to click at this time the Make Default button on the dialog box.. By default, it will choose a PreSonus driver if one is available In the Options window, click on the Audio Setup tab and select your device driver from the pull-down. 5ebbf469cd

5ebbf469cd

Presonus 32.4.2 Digital Mixer Driver For Mac